WVM-02T type
View favorites See the comparison
It is a primary pressure control valve for large capacity and is a type-approved registered product for firefighting equipment. It releases an excessive amount of pressure in the pipe or circuit due to immutability at the desired pressure, and keeps the pressure on the primary side of the valve constant.
Where to use
Fire extinguishing equipment

Major features

  • Stable operation can be easily obtained by adjusting the sensitivity by adjusting the needle valve opening according to the usage conditions.
  • The basic valve and pilot valve can be easily disassembled for easy maintenance such as adjustment, repair, and parts replacement.
  • The lift limiting mechanism can limit the overflow.

Japan Fire Equipment Safety Center Type Certification Registered Product

specification

Product code WVM02T-B WVM02T-L
Valve type Primary pressure control valve for fire extinguishing equipment Primary pressure control valve for fire extinguishing equipment
Use For fire extinguishing equipment For fire extinguishing equipment
Nominal diameter 50-150 (2-6) 40-150 (1 1/2-6)
Applicable fluid Fire extinguishing water Fire extinguishing water
Fluid temperature 5-60 ° C 5-60 ° C
Primary side applied pressure 1.6MPa or lessWe also manufacture primary side applicable pressure of 1.0MPa or less (JIS 10K RF flange, set pressure adjustment range of 0.3 to 1.0MPa). 1.6MPa or lessWe also manufacture primary side applicable pressure of 1.0MPa or less (JIS 10K RF flange, set pressure adjustment range of 0.3 to 1.0MPa).
Set pressure adjustment range 0.3-1.6MPa 0.3-1.6MPa
Blow-down pressure Set pressure x 15% or less Set pressure x 15% or less
Accumulation Set pressure x 10% or less (minimum value 0.03MPa) Set pressure x 10% or less (minimum value 0.03MPa)
End connection JIS 16K RF flangeWe also manufacture primary side applicable pressure of 1.0MPa or less (JIS 10K RF flange, set pressure adjustment range of 0.3 to 1.0MPa). JIS 16K RF flangeWe also manufacture primary side applicable pressure of 1.0MPa or less (JIS 10K RF flange, set pressure adjustment range of 0.3 to 1.0MPa).
Pressure resistance test (water pressure) 2.4MPa at water pressure 2.4MPa at water pressure
Mounting posture Horizontal / vertical freedomWhen installing in vertical piping, leave a large maintenance space. Horizontal / vertical freedomWhen installing in vertical piping, leave a large maintenance space.
Basic valve material body FC FCD
Basic valve material Main part Diaphragm disc NBR NBR
Basic valve material Main part Valve seat CAC406 CAC406
Basic valve painting inner surface Liquid epoxy resin for water supply Liquid epoxy resin for water supply
Basic valve painting outer surface Red (Munsell 7.5R 4/15) Red (Munsell 7.5R 4/15)
  • We also manufacture one with a pressure gauge. (The maximum scale of the pressure gauge is the set pressure adjustment range of 0.3 to 1.6MPa (2.5MPa).)

Download materials

Download materials

Common to all product symbols

WVM-02T Catalog

WVM-02T Price List

WVM-02T (FCD_16K) outline drawing

WVM-02T (FC_16K) outline drawing

WVM-02T (40,50A) Instruction Manual

WVM-02T (65-150A) Instruction Manual

WVM02T-B

WVM02T-B(50A) FC reference drawing

WVM02T-B(65-150A) FC reference drawing

WVM02T-L

WVM02T-L(40,50A) FCD reference drawing

WVM02T-L(65-150A) FCD reference drawing

Frequently Asked Questions and Explanations

What is the purpose of the primary pressure control valve installed on the outlet side of the pump?

It is used to prevent overheating due to shutoff operation of the pump and to keep the pump discharge pressure constant.

What is a back pressure valve?

Refers to the primary pressure control valve. A regulating valve that discharges fluid in response to changes in the force on the primary side in order to maintain the fluid pressure on the primary side at a certain constant pressure.

What is the purpose of the water fall prevention valve?

Please check the details.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.