WVMS-02 type
View favorites See the comparison
It is an air conditioner that uses cold and hot water as a heat source and is attached to the return pipe of the open circuit. When the pump is stopped, the valve closes immediately to prevent the return pipe from falling.
During operation, the valve opening is adjusted according to the passing flow rate, and the pressure of the forward pipe and return pipe is maintained at an appropriate pressure to give the air conditioner stable pressure conditions.
Where to use
Air conditioning equipmentAir conditioning equipment

Major features

  • Stable operation can be easily obtained by adjusting the sensitivity by adjusting the needle valve opening according to the usage conditions.
  • It is responsive to pressure changes and the valve closes quickly when the pump is stopped.
  • The basic valve and pilot valve can be easily disassembled for easy maintenance such as adjustment, repair, and parts replacement.
  • The lift limiting mechanism can limit the overflow.

specification

Product code WVMS02-B □The symbol of the set pressure adjustment range is entered in □. WVMS02-L □The symbol of the set pressure adjustment range is entered in □.
Valve type Water fall prevention valve Water fall prevention valve
Nominal diameter 80-200 (3-8) 80-200 (3-8)
Applicable fluid Water / hot water Water / hot water
Fluid temperature 5-60 ° C 5-60 ° C
Primary side applied pressure 1.0MPa or less 1.0MPa or less
Set pressure adjustment range L: 0.05-0.35MPa, H: 0.3-0.7MPa L: 0.05-0.35MPa, H: 0.3-0.7MPa
Blow-down pressure Set pressure adjustment range (L) 0.05 to 0.35 MPa: Set pressure x 20% or less (minimum value 0.03 MPa)
Set pressure adjustment range (H) 0.3 to 0.7 MPa: Set pressure x 15% or less
Set pressure adjustment range (L) 0.05 to 0.35 MPa: Set pressure x 20% or less (minimum value 0.03 MPa)
Set pressure adjustment range (H) 0.3 to 0.7 MPa: Set pressure x 15% or less
Accumulation Set pressure x 10% or less (minimum value 0.03MPa) Set pressure x 10% or less (minimum value 0.03MPa)
End connection JIS 10K RF flange JIS 10K RF flange
Pressure resistance test (water pressure) 1.5MPa at water pressure 1.5MPa at water pressure
Mounting posture Upright mounting on horizontal piping Upright mounting on horizontal piping
Material body FC FCD
Material Valve seat CAC406 CAC406
Material Diaphragm disc NBR NBR
Basic valve painting inner surface Liquid epoxy resin for water supply Liquid epoxy resin for water supply
  • Refer to page 161 of the general catalog, page 157 for the nominal diameter selection chart, and page 175 for a schematic diagram of piping examples for the selection of water fall prevention valves.
  • We also manufacture with two pressure gauges. (The maximum scale of the pressure gauge is the set pressure adjustment range L (0.6MPa), H (1.6MPa) on the primary side and 0.6MPa on the secondary side.)

Download materials

Download materials

Common to all product symbols

WVMS-02 Catalog

WVMS-02 Price List

Frequently Asked Questions and Explanations

What is the purpose of the primary pressure control valve installed on the outlet side of the pump?

It is used to prevent overheating due to shutoff operation of the pump and to keep the pump discharge pressure constant.

What is a back pressure valve?

Refers to the primary pressure control valve. A regulating valve that discharges fluid in response to changes in the force on the primary side in order to maintain the fluid pressure on the primary side at a certain constant pressure.

What is the purpose of the water fall prevention valve?

Please check the details.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.