BM-12CR type
View favorites See the comparison
The capacitor return ball type electric valve adopts a power storage method that uses a capacitor, and opens and closes the valve by switching between energization and power failure in the drive unit.
It is a ball-type electric valve that combines the features of an electric valve with free flow direction and the convenience of a solenoid valve that can be controlled by a 2-wire system. The BM-12CR type is for use, the BM-13CR type is a long neck type, and the BM-14CR type is made of stainless steel, which is used for on / off control.

Major features

  • AC100 / 200V can be shared.
  • It can be controlled by the same 2-wire system as the solenoid valve.
  • It is an energy-saving type with a small rated current value.
  • Since the ball is made of stainless steel (SUS316), it has excellent durability.
  • The flow direction and mounting direction (indoor) are free.

specification

Product code BM12CR-J
Actuation Valve closed during power failure, valve open during energizationWe also manufacture BM-12CRC, 13CRC, and 14CRC types that close the valve when energized and open the valve when there is a power failure.
format Standard neck type
Nominal diameter 10-25 (3 / 8-1)
Applicable fluid Water / oilFor fuel oil and light oil, the material of the main body may be specified depending on the destination (Ministry of Land, Infrastructure, Transport and Tourism, Ministry of Defense, etc.), so please check.・ Air / gas / liquid
Fluid temperature -10 to 80 ° C (cannot be frozen)
Applicable pressure 0-1.0MPa
Ambient temperature -10 to 50 ° C
Allowable leakage amount Water / oil: None (visual pressure gauge), air / gas: 50 mL / mn (standard condition) or less
End connection JIS Rc screw
Rated voltage AC100 / 200V (50 / 60Hz) shared
Allowable voltage fluctuation range Rated voltage ± 10%
Opening and closing time About 6 secondsWhen the capacitor is fully chargedWhen operating for the first time, charge (energize) for about a minute before operating. Since the capacitor charging voltage is low during the initial operation or when restarting after a long period of inactivity, it takes about 20 seconds to start operation after energization, and about 30 seconds to fully open.
Insulation type Class A
Time rating Continuous
Insulation resistance 20MΩ
Protective structure Jet-proof type (equivalent to IP55)For outdoor installation, avoid vertical piping installation and direct sunlight.
Manual mechanism With
Rated current AC100V: 0 03AWhen the capacitor is fully charged , AC200V: 0.015AWhen the capacitor is fully charged
Starting current AC100V: 0.2AAt the start of capacitor charging , AC200V: 0.1AAt the start of capacitor charging
power consumption 3VAWhen the capacitor is fully charged (20VA)(At the start of capacitor charging )
Material body CAC406
Material ball SUS316
  • We also manufacture BM-12CRN type (nominal diameter 15 to 25), BM-13CRN, 14CRN type, which comply with the performance standards of the Waterworks Law.
  • We also manufacture with open / close signal contact (no voltage).

Download materials

Download materials

Common to all product symbols

BM-12CR Catalog

BM-12CR Price List

BM-12CR outline drawing

BM-12CR Instruction Manual

BM12CR-J

BM12CR-J reference diagram

Frequently Asked Questions and Explanations

What is overload protection?

This prevents the motor from burning if the motor exceeds the maximum allowable temperature for some reason.

What is a spring return type? (There is a video in the answer details)

It is a mechanism that winds the spring at the same time as the valve opens when the power is turned on, and closes the valve by the force of the spring that winds up when there is a power failure. (In the case of valve open type when energized)

Do you make a spring return type three-way valve?

We do not manufacture spring return type three-way valves.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.