BM-16S type
View favorites See the comparison
This general-purpose small ball-type motorized valve can be used with a rated voltage of AC100/200V, has a wide pressure range, and is small and lightweight, so it can be used with the same ease as or even greater ease than a solenoid valve.
The BM-12S and 16S models are for general purpose, the BM-13S model is a long neck type, and the BM-14S model has a stainless steel body and is used for on/off control.

Major features

  • AC100 / 200V can be shared.
  • It is small, lightweight and easy to handle.
  • It can be used anywhere in a wide pressure range.
  • The flow direction and mounting direction (indoor) are free.
  • Since the ball is made of stainless steel (SUS316), it has excellent durability.

specification

Product code BM16S-J
Actuation On / Off
format Standard neck type
Nominal diameter 32 to 50 (1 1/4 to 2)
Applicable fluid Water / oilFor fuel oil and light oil, the material of the main body may be specified depending on the destination (Ministry of Land, Infrastructure, Transport and Tourism, Ministry of Defense, etc.), so please check.・ Air / gas / liquid
Fluid temperature -10 to 80 ° C (cannot be frozen)We also manufacture the EcoCute hot water supply stop valve BM-16SHN type (nominal diameter 32 to 50) with a fluid temperature of 0 to 95 ° C (a product that conforms to the performance standards of the Waterworks Law).
Applicable pressure 0-1.0MPa
Ambient temperature -10 to 50 ° C
Allowable leakage amount Water / oil: None (visual pressure gauge), Air / gas: 50 mL / min (standard condition) or less
End connection JIS Rc screw
Rated voltage AC100 / 110/200 / 220V (50 / 60Hz) sharedPlease contact us for other special voltages.
Allowable voltage fluctuation range Rated voltage ± 5%
Rated capacity Nominal diameter 32 to 50: 20VA (AC110V), 40VA (AC220V)
Rated current / starting current Nominal diameter 32-50: 0.18A / 0.18A
Opening and closing time Nominal diameter 32 to 50: 10 / 8.5 seconds (50 / 60Hz)
Insulation type E species
Time rating Nominal diameter 32 to 50:10 minutes
Insulation resistance 50MΩ or more
Overload protection Thermal protector
Protective structure Rainproof type (equivalent to IP-53)For outdoor installation, avoid vertical piping installation and direct sunlight.
Manual mechanism With
Material body CAC406
Material ball SUS316
  • We also manufacture BM-12SN, 13SN, 14SN, and 16SN models that comply with the performance standards of the Water Supply Act (excluding nominal diameter 10).
  • We also manufacture with a space heater. (Prevention of rust due to dew condensation inside the drive unit) Note that the motor with a nominal diameter of 25 or less will be changed from a round motor to a square motor.
  • Please contact us for square motors with open/close signal contacts.
  • Please contact us for models with built-in relay and open/close signal contacts (BM-16S type, 14S type: nominal diameter 32 to 50).

Download materials

Download materials

Common to all product symbols

BM-16S Catalog

BM-16S price list

BM-16S outline drawing

BM-16S, 16SN Instruction Manual

BM16S-J

BM16S-J reference diagram

Frequently Asked Questions and Explanations

What is overload protection?

This prevents the motor from burning if the motor exceeds the maximum allowable temperature for some reason.

What is a spring return type? (There is a video in the answer details)

It is a mechanism that winds the spring at the same time as the valve opens when the power is turned on, and closes the valve by the force of the spring that winds up when there is a power failure. (In the case of valve open type when energized)

Do you make a spring return type three-way valve?

We do not manufacture spring return type three-way valves.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.