Pressure reducing valve (for steam, for air / gas) RP-11 type pressure reducing valve (for steam)
With a maximum decompression ratio of 20: 1, stable operation is achieved even at high differential pressures.
The face-to-face dimensions are the same as the old RP-2H pressure reducing valve, and the weight is reduced by about 40%.
Please refer to page 16 of the catalog for the nominal diameter selection chart.
specification
| Product code | RP11-D |
|---|---|
| type | Made of stainless steel |
| Nominal diameter | 15-150 (1/2-6) |
| Applicable fluid | steam |
| Fluid temperature | 250 ° C or less |
| Primary side applied pressure | 3.0MPa or less |
| Secondary adjustment pressure range | 0.03 ~ 0.8MPaWe also manufacture RP-9N type (nominal diameter 15 ~ 80: 0.8 ~ 1.95MPa, nominal diameter 100 ~ 150: 0.8 ~ 1.93MPa) and RP-10N, 11N type (0.8 ~ 2.0MPa) for high secondary pressure. |
| Maximum decompression ratio | 20: 1 |
| Minimum differential pressure before and after the valve | Nominal diameter 15 ~ 80: 0.05MPa, Nominal diameter 100 ~ 150: 0.07MPa |
| Deadline boost | 0.02MPa or less |
| offset | Within 0.02MPa (Secondary adjustment pressure 0.03 to 0.035MPa) Within 0.03MPa (Secondary adjustment pressure over 0.035 0.07MPa) Within 0.05MPa (Secondary adjustment pressure over 0.07 0.8MPa) |
| Allowable leakage amount | 0.05% or less of the rated flow rate |
| End connection | JIS 30K RF flangeWe also manufacture JIS 10, 16 and 20K FF / RF flanges. |
| Material body | SCS |
| Material Valve body | SUS |
| Material Valve seat | SUS |
| Material Piston / Cylinder | SUS |
| Handle or cap color | Silver |
| Mounting posture | Upright mounting on horizontal piping |
Download materials
Frequently Asked Questions and Explanations
Is there a leak in the steam pressure reducing valve?
The allowable leakage amount is stated in the specifications of each product.
Does the fluid flow without pressure adjustment?
It doesn't flow. It will flow normally only after adjusting the pressure.
How should I perform maintenance and inspection of the steam pressure reducing valve?
We perform regular maintenance once a year as a guide. Please refer to the instruction manual for details.
Inquiries about this product
Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.
We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.
List of related products
Please cooperate with the questionnaire
We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.
Was this page helpful?
How easy was it to find the page you were looking for on this site?
How was the page easy to understand about this site?
Thank you for your cooperation
Added to comparison table View comparison table
Added to Favorites View Favorites
Added to Download BOX Download BOX
