RD-44N type
View favorites See the comparison
The RD-44N type is a valve with only the decompression function, which is the basis of the decompression compound valve series for door-to-door water supply, and can improve construction and test efficiency.
When using a pressure reducing valve for door-to-door water supply
1. 1. Running water noise is reduced.
2. By installing a pressure reducing valve in each house, the variation in water supply pressure due to the difference in layers is eliminated.
3. 3. Due to the proper pressure, the water splash phenomenon is unlikely to occur. Reduce water hammer.
Four. During maintenance, it will not be affected by water outages.
Five. The mixing temperature is stable.
Such as, living performance is improved.
Where to use
housing complexHoteloffice building

Major features

  • Uses chlorine water resistant EPDM.
  • Hygienic structure without liquid pool.
  • Reliable operation from low differential pressure to high differential pressure.
  • Water pressure test is possible with the pressure reducing valve installed.
  • Easy and simple new test gag method adopted.

Water Supply Law Performance Standard Certification Registered Product (E-157) Pressure Pressure Performance Leaching Performance Durability Performance

specification

Product code RD44N-F □Please refer to "How to represent product symbols"
Valve type Pressure reducing valve for door-to-door water supply
Nominal diameter 20 (3/4)
Applicable fluid Tap water / hot water
Fluid temperature 5 to 90 ° C (5 to 40 ° C when using tube end core)
Primary side applied pressure 1.0MPa or less
Secondary adjustment pressure range (set pressure) L: 0.05 to 0.12MPa (0.08MPa) M: 0.11 to 0.23MPa (0.20MPa) H: 0.20 to 0.30MPa (0.20,0.25MPa)If the set pressure exceeds 0.3MPa, please contact us.For other set pressures, refer to "How to represent product symbols".
Nameplate color L: Green M: Blue H: Red
Maximum decompression ratio 10: 1
Minimum differential pressure before and after the valve 0.02MPa
Rated flow rate 50L / min (differential pressure 0.1MPa or more)
End connection P (male union joint): JIS R3/4 thread (compatible with P/V core) B (female union joint): JIS Rc3/4 thread (built-in P/V movable core) C (male/female union joint): JIS R3/4 thread/JIS Rc3/4 thread (cores are the same as above)
Mounting posture Horizontal / vertical freedom (excluding strainer cap upward)
accessories Union fittings (pipes, nuts, gaskets), heat insulation cases (self-extinguishing properties), test gag, pressure gauge fittings (for secondary side, main body installed)The pressure gauge fitting can be used in combination with the opposite plug.
strainer 60 mesh
Material body CAC406
Material diaphragm Chlorine water resistant EPDM
Material disc Chlorine water resistant EPDM
  • The pressure gauge is an optional item, and A type or D type can be selected. (The maximum scale of the pressure gauge is 0.5MPa.)
  • For the nominal diameter 25, use the RD-47N type (see page 65).
  • If it is equipped with a water stopcock, use the RD-45SN, 45SUN type (see page 58).
  • For buried piping, use RD-46N type (see page 64).

Download materials

Download materials

Common to all product symbols

RD-44N Catalog

RD-44N Price list

RD-44N type PB outline drawing

RD-44N outline drawing

RD-44N Instruction Manual

RD44N-F □

RD-44N Union fitting (Rc × Rc) with core Reference drawing

RD-44N Union Fitting (R × R) Reference Diagram

RD-44N Union fitting (with R x Rc core) Reference drawing

RD-44N Union fitting (with Rc core x R) Reference drawing

Frequently Asked Questions and Explanations

What is the useful life (the number of years recommended for replacement)?

The service life of pressure reducing valves for door-to-door water supply is 8 years after regular inspections, maintenance, and replacement of consumable parts, but this may vary depending on usage conditions.

Does the pressure reducing valve generate noise due to deterioration over time?

Noise tends to be higher due to disc damage (bite) and benza damage over time.

Is it necessary to install a pressure reducing valve for water supply for each house in all the units of an apartment house?

Not all units have it. It is not necessary to install it if the water pressure is not high on the upper floors.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.