RD-44SN type
View favorites See the comparison
This is a pressure reducing valve for door-to-door water supply with a separate water stopcock, which is installed inside the pipe shaft of a hotel or condominium and is installed for the purpose of keeping the fluctuation of water supply pressure due to the difference in the floors of middle- and high-rise buildings.
Where to use
Hotelhousing complex

Major features

  • Since the water stopcock is a separable type, it is easy to install, and it is easy to replace the pressure reducing valve after piping and maintain the water supply equipment.
  • Uses chlorine water resistant EPDM.
  • Hygienic structure without liquid pool.
  • Reliable operation from low differential pressure to high differential pressure.
  • Water pressure test is possible with the pressure reducing valve installed.
  • Easy and simple new test gag method adopted.

Water Supply Law Performance Standard Certification Registered Product (E-157) Pressure Pressure Performance Leaching Performance Durability Performance

specification

Product code RD44SN-FHL3 RD44SN-FLL1 RD44SN-FML2
Valve type Pressure reducing valve for door-to-door water supply Pressure reducing valve for door-to-door water supply Pressure reducing valve for door-to-door water supply
Nominal diameter 20 (3/4) 20 (3/4) 20 (3/4)
Applicable fluid Tap water / hot waterThe hot water identification cap is ordered separately and packed separately. Tap water / hot waterThe hot water identification cap is ordered separately and packed separately. Tap water / hot waterThe hot water identification cap is ordered separately and packed separately.
Fluid temperature 5 to 90 ° C (5 to 40 ° C when using tube end core) 5 to 90 ° C (5 to 40 ° C when using tube end core) 5 to 90 ° C (5 to 40 ° C when using tube end core)
Primary side applied pressure 1.0MPa or less 1.0MPa or less 1.0MPa or less
Secondary adjustment pressure range (set pressure) 0.20-0.30MPa (0.25MPa) 0.05-0.12MPa (0.08MPa) 0.11 to 0.23MPa (0.20MPa)
Name sticker color Red Green Blue
Maximum decompression ratio 10: 1 10: 1 10: 1
Minimum differential pressure before and after the valve 0.02MPa 0.02MPa 0.02MPa
Rated flow rate 50L / min (differential pressure 0.1MPa or more) 50L / min (differential pressure 0.1MPa or more) 50L / min (differential pressure 0.1MPa or more)
End connection Entrance side: JIS Rc3 / 4 screwWe also manufacture with a tube end core. See page 60.
Exit side: JIS G screwBe sure to use a male union fitting (R3 / 4) or a female union fitting (Rc3 / 4) on the secondary side. It will be ordered separately and packed separately.
Entrance side: JIS Rc3 / 4 screwWe also manufacture with a tube end core. See page 60.
Exit side: JIS G screwBe sure to use a male union fitting (R3 / 4) or a female union fitting (Rc3 / 4) on the secondary side. It will be ordered separately and packed separately.
Entrance side: JIS Rc3 / 4 screwWe also manufacture with a tube end core. See page 60.
Exit side: JIS G screwBe sure to use a male union fitting (R3 / 4) or a female union fitting (Rc3 / 4) on the secondary side. It will be ordered separately and packed separately.
Mounting posture Horizontal / vertical freedom Horizontal / vertical freedom Horizontal / vertical freedom
accessories Heat insulation case for pressure reducing valve (self-extinguishing property), test gag, pressure gauge joint (secondary side, main body installedThe pressure gauge fitting can be used in combination with the opposite plug. ) Heat insulation case for pressure reducing valve (self-extinguishing property), test gag, pressure gauge joint (secondary side, main body installedThe pressure gauge fitting can be used in combination with the opposite plug. ) Heat insulation case for pressure reducing valve (self-extinguishing property), test gag, pressure gauge joint (secondary side, main body installedThe pressure gauge fitting can be used in combination with the opposite plug. )
strainer 60 mesh 60 mesh 60 mesh
Material Pressure reducing valve body CAC CAC CAC
Material Pressure reducing valve diaphragm Chlorine water resistant EPDM Chlorine water resistant EPDM Chlorine water resistant EPDM
Material Pressure reducing valve disc Chlorine water resistant EPDM Chlorine water resistant EPDM Chlorine water resistant EPDM
Material Water stop ball CAC plating process CAC plating process CAC plating process
  • The pressure gauge can be selected from A type or D type as an option. It will be ordered separately and packed separately. (The maximum scale of the pressure gauge is 0.5MPa.)

Download materials

Download materials

Common to all product symbols

RD-44SN Catalog

RD-44SN Price List

RD-44SN outline drawing

RD-44SN Instruction Manual

RD44SN-FHL3

RD44SN-FH reference diagram

RD44SN-FLL1

RD44SN-FL reference diagram

RD44SN-FML2

RD44SN-FM reference diagram

Frequently Asked Questions and Explanations

What is the useful life (the number of years recommended for replacement)?

The service life of pressure reducing valves for door-to-door water supply is 8 years after regular inspections, maintenance, and replacement of consumable parts, but this may vary depending on usage conditions.

Does the pressure reducing valve generate noise due to deterioration over time?

Noise tends to be higher due to disc damage (bite) and benza damage over time.

Is it necessary to install a pressure reducing valve for water supply for each house in all the units of an apartment house?

Not all units have it. It is not necessary to install it if the water pressure is not high on the upper floors.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.