PF-22 type
View favorites See the comparison
The flange-type PF-22 type series solenoid valve Momotaro II inherits the features that have already been well received from the conventional PF-12 type series, and makes it easy to replace at the time of repair by making the inter-plane dimensions the same value. At the same time, the durability performance has improved dramatically. In addition, the solenoid valve has a higher degree of perfection in consideration of the environment, such as power saving and clearing the RoHS directive regulation value.
Where to use
Production equipmentBuilding equipment

Major features

  • It has cleared the operating durability of 1 million times (Note.). Note. Nominal diameter 25 or less (according to in-house test)
  • It is shared with steam, water, air, and oil.
  • It can be used in a wide pressure range from 0 to 1.0 MPa.
  • Vertical and horizontal mounting is free.
  • The coil exterior uses thermosetting resin that is resistant to heat. (Nominal diameter 25 or less)

specification

Product code PF22-W
type Piston type
Actuation Energized open
Nominal diameter 15-50 (1/2-2)
Applicable fluid Steam / water / air / oil (kerosene / light oil) For fuel oil and light oil, the material of the main body may be specified depending on the destination (Ministry of Land, Infrastructure, Transport and Tourism, Ministry of Defense, etc.), so please check and specify the material.
Fluid temperature 5 to 180 ° C (100 ° C or less for hot water)
Fluid viscosity 20cSt or less
Applicable pressure 0-1.0MPa
Minimum differential pressure before and after the valve 0MPa (0.03MPa when the coil is horizontal)
Allowable leakage amount Steam / water / oil: None (visual pressure gauge), air: 50 mL / min (standard condition) or less (at 0.05 to 1.0 MPa)
Rated voltage AC100 / 200V 50 / 60Hz AC110 / 220V 60Hz sharedPlease contact us for other special voltages. (Coil shape and specifications are different.)
Insulation type H species
Ambient temperature 5-60 ℃
Protective structure Dustproof / splashproof / indoor useNominal diameter 32 or more is dust-proof and drip-proof. (When using outdoors, use the TB-03 type terminal box together.Dedicated voltage with terminal box, rainproof type with TB-03 type terminal box, splashproof type (nominal diameter 25 or less), rainproof type (nominal diameter 32 or more) with TB-03C type terminal box ). (For the terminal box, refer to page 366 of the general catalog.) )
End connection JIS 10K FF flange
Mounting posture Horizontal / vertical (excluding the coil downward with respect to the mounting pipe)
Material body CAC408
Material Valve body C3604, with PTFE disc
  • For nominal diameters of 32 or more and special voltages, the coil shape and specifications are different.
  • If you want to have no air leakage, or if you want to use it for well water or river water, please use the WF type series.
  • If the nominal diameter is 32 or more and the atmospheric humidity exceeds 85%, use the PF-22Y, 22CY type. (Please contact us for nominal diameters of 25 or less.)
  • Please contact us for high viscosity (100cSt or less).
  • We also manufacture with a manual mechanism. (Excluding energized closed fluid vapor)
  • Refer to page 366 for the lead wire connection method.

Download materials

Download materials

Common to all product symbols

PF-22 Catalog

PF-22 Price List

PF-22 outline drawing

PF-22 External view with terminal box

PF-22 Instruction Manual

PF22-W

PF22-W (15-25A) reference diagram

PF22-W (15-25A) Reference drawing with terminal box

PF22-W (32-50A) reference diagram

Reference drawing with PF22-W (32-50A) terminal box

Frequently Asked Questions and Explanations

Is there any problem if the solenoid valve is used (energized) with the valve open for a long time?

The solenoid valve coil has a "continuous rating", so there is no problem even if it is used while it is energized.

The coil of the solenoid valve is hot, is that okay? (There is a video in the answer details)

There is no problem even if the coil part is hot. Please check the video explaining the answer in detail.

If the secondary side of the solenoid valve is a rising pipe, does it flow back?

The solenoid valve is closed by the weight of the valve body and the fluid pressure. Therefore, when there is no inlet pressure and a reverse pressure is applied, the valve opens and backflow occurs. In this case, install a check valve on the secondary side of the solenoid valve.

Please tell me the structure and operation of the solenoid valve. (There is a video in the answer details)

Please watch the video of the answer details.

Inquiries about this product

Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.

We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.

Please cooperate with the questionnaire

We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.

Was this page helpful?

How easy was it to find the page you were looking for on this site?

How was the page easy to understand about this site?

Thank you for your cooperation

Added to Favorites View Favorites

close

Added to Download BOX Download BOX

close

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.