Solenoid valve PS-12C type solenoid valve (for steam, liquid, air)
- Where to use
- Production equipmentBuilding equipment
Major features
- It is shared with steam, water, air, and oil.
- It can be used in a wide pressure range from 0 to 1.0 MPa.
- Both types, energized open and energized closed, are available in a series.
specification
| Product code | PS12C-W |
|---|---|
| type | Piston type |
| Actuation | Energized closed |
| Nominal diameter | 65 (2 1/2) |
| Applicable fluid | Steam / water / air / oil (kerosene / light oil)For fuel oil and light oil, the material of the main body may be specified depending on the destination (Ministry of Land, Infrastructure, Transport and Tourism, Ministry of Defense, etc.), so please check. |
| Fluid temperature | 5 to 180 ° C (100 ° C or less for hot water) |
| Fluid viscosity | 20cSt or less |
| Applicable pressure | 0-1.0MPa |
| Minimum differential pressure before and after the valve | 0MPa |
| Allowable leakage amount | Steam / water / oil: None (visual pressure gauge), air: 50 mL / min (standard condition) or less (at 0.05 to 1.0 MPa) |
| Rated voltage | AC100 / 200V 50 / 60Hz AC110 / 220V 60Hz sharedPlease contact us for other special voltages. |
| Insulation type | H species |
| Ambient temperature | 5-60 ℃ |
| Protective structure | Dust-proof, drip-proof, indoor use (when using outdoors, use the TB-03 type terminal box together.With a terminal box, the voltage is dedicated, and with a TB-03 type terminal box, it is rainproof. (For the terminal box, refer to page 366 of the general catalog.) ) |
| End connection | JIS Rc screw |
| Mounting posture | Upright mounting with coil up on horizontal piping |
| Rated current | AC100V: 0.60A, AC200V: 0.30A |
| Starting current | AC100V: 2.50A, AC200V: 1.25A |
| Material body | CAC406 |
| Material Valve body | SUS, PTFE disc included |
- Please use the WS type series if you want no leakage with air, or if you want to use it for well water or river water.
- If the atmospheric humidity exceeds 85%, please use PS-12Y, 12CY type.
- For the lead wire connection method, refer to page 366 of the general catalog.
Download materials
Frequently Asked Questions and Explanations
Is there any problem if the solenoid valve is used (energized) with the valve open for a long time?
The solenoid valve coil has a "continuous rating", so there is no problem even if it is used while it is energized.
The coil of the solenoid valve is hot, is that okay? (There is a video in the answer details)
There is no problem even if the coil part is hot. Please check the video explaining the answer in detail.
If the secondary side of the solenoid valve is a rising pipe, does it flow back?
The solenoid valve is closed by the weight of the valve body and the fluid pressure. Therefore, when there is no inlet pressure and a reverse pressure is applied, the valve opens and backflow occurs. In this case, install a check valve on the secondary side of the solenoid valve.
Inquiries about this product
Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.
We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.
List of related products
Please cooperate with the questionnaire
We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.
Was this page helpful?
How easy was it to find the page you were looking for on this site?
How was the page easy to understand about this site?
Thank you for your cooperation
Added to comparison table View comparison table
Added to Favorites View Favorites
Added to Download BOX Download BOX
