Solenoid valve WS-12 type solenoid valve (for liquids and gases)
- Where to use
- Production equipmentBuilding equipment
Major features
- For liquids and gases.
- It can be used in a wide pressure range from 0 to 1.0 MPa.
- Equipped with a water hammer mitigation mechanism.
- Both types, energized open and energized closed, are available in a series.
specification
| Product code | WS12-F |
|---|---|
| type | Diaphragm type |
| Actuation | Energized open |
| Nominal diameter | 65 (2 1/2) |
| Applicable fluid | Water / airWhen used in a dry air pneumatic system with an oil-free compressor (turbo compressor or positive displacement compressor (rotary oil-free type)), rubber parts may deteriorate significantly in a short time (ozone cracks occur). ). Please contact us if you want to install it in such a place.・ Inert gasIt cannot be used for flammable gas.・ Oil (kerosene / light oil)For fuel oil and light oil, the material of the main body may be specified depending on the destination (Ministry of Land, Infrastructure, Transport and Tourism, Ministry of Defense, etc.), so please check. |
| Fluid temperature | 5-60 ℃ |
| Fluid viscosity | 20cSt or less |
| Applicable pressure | 0-1.0MPa |
| Minimum differential pressure before and after the valve | 0MPa |
| Allowable leakage amount | None (visual pressure gauge, when gas is 0.02 to 1.0 MPa) |
| Rated voltage | AC100 / 200V 50 / 60Hz AC110 / 220V 60Hz sharedPlease contact us for other special voltages. |
| Insulation type | Type B |
| Ambient temperature | 5-60 ℃ |
| Protective structure | Dust-proof, drip-proof, indoor use (when using outdoors, use the TB-03 type terminal box together.With a terminal box, the voltage is dedicated, and with a TB-03 type terminal box, it is rainproof. (For the terminal box, refer to page 366 of the general catalog.) ) |
| End connection | JIS Rc screw |
| Mounting posture | Upright mounting with coil up on horizontal piping |
| Rated current | AC100V: 0.60A, AC200V: 0.30A |
| Starting current | AC100V: 2.50A, AC200V: 1.25A |
| Material body | CAC406 |
| Material diaphragm | NBR |
- If the atmospheric humidity exceeds 85%, use WS-12Y, 12CY type.
- For the lead wire connection method, refer to page 366 of the general catalog.
Download materials
Frequently Asked Questions and Explanations
Solenoid valve (for liquids and gases)
Solenoid valve (for liquids and gases)
Solenoid valve (for liquids and gases)
Inquiries about this product
Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.
We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.
Please cooperate with the questionnaire
We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.
Was this page helpful?
How easy was it to find the page you were looking for on this site?
How was the page easy to understand about this site?
Thank you for your cooperation
Added to comparison table View comparison table
Added to Favorites View Favorites
Added to Download BOX Download BOX
