Steam trap, drain separator, silencer, air trap, radiator valve ATB-5 type Steam trap with bypass
It is effective for effective use of space and reduction of equipment costs.
- Where to use
- Piping lineheader
Major features
- Since the amount of discharge is large, it can be used from the end of the pipe to large equipment.
- Since it operates at a temperature that is 10 ° C lower than the saturated steam temperature (nominal diameters 32 to 50 operate at a temperature that is 15 ° C lower), there is no discharge of raw steam or empty valve body, which saves energy.
- Nominal diameters 32 to 50 have excellent sealing performance and durability due to the adoption of a movable valve body.
- The test valve can be attached directly to the trap.
specification
| Product code | ATB5-G |
|---|---|
| Valve type | steam trap |
| format | Thermo element type |
| Nominal diameter | 15-25 (1/2-1) |
| Applicable fluid | Saturated steamIt cannot be used for superheated steam. |
| Fluid temperature | 184 ℃ or less |
| Applicable pressure | 1.0MPa or less |
| Maximum continuous emissions | 6250L / h |
| End connection | JIS Rc screw |
| Mounting posture | Horizontal / vertical / horizontal mounting freeNominal diameters 32 to 50 should be mounted upright on horizontal pipes. |
| Material body | FC |
| Material Valve body | SUS |
| Material Valve seat | SUS |
| Material cock | CAC406 |
| Material Thermo element | SUS316L |
- We also manufacture a fixed switching lever.
Download materials
Frequently Asked Questions and Explanations
What is a drain?
In steam-related terms, it refers to steam condensed water (a state in which steam has cooled and returned to water).
What is the role of the steam trap?
When the steam cools, it returns to water (drain). If drainage accumulates in the piping and equipment, it may reduce the efficiency of the equipment and cause water hammer, so it is used for the purpose of automatically discharging the generated drainage.
What is the role of the bypass circuit in the steam trap with bypass?
The bypass function is used at the initial stage of ventilation of equipment, etc., and it is used for the purpose of discharging a large amount of air and drain to accelerate the start-up time.
Inquiries about this product
Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.
We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.
List of related products
Please cooperate with the questionnaire
We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.
Was this page helpful?
How easy was it to find the page you were looking for on this site?
How was the page easy to understand about this site?
Thank you for your cooperation
Added to comparison table View comparison table
Added to Favorites View Favorites
Added to Download BOX Download BOX
