Strainer KT-1A type strainer
Problems such as conventional strainer construction, maintainability, and pressure loss can be solved.
The KT-1D type is a knot type that makes it easy to lift the top lid.
The KT-1A type is ideal for places where cleaning is frequent because the net can be inspected with a single bolt.
specification
| Product code | KT1A-G |
|---|---|
| Valve type | Straight type |
| type | Catgut type |
| Nominal diameter | 50-150 (2-6) |
| Applicable fluid | Gas / liquid |
| Fluid temperature | 5 to 90 ° C |
| Applicable pressure | Nominal diameter 50-100: 1.0MPa or less Nominal diameter 125: 0.75MPa or less Nominal diameter 150: 0.5 MPa or less |
| End connection | JIS 10K FF flange |
| Mesh | 60 mesh 20, 40, 80, 100 meshAs for the mesh, we also manufacture only punched holes (punched boards) without mesh lining. |
| Tolerant differential pressure | 0.1MPa or lessIf the differential pressure exceeds 0.1MPa, the net may be damaged. Clean the net so that it does not exceed 0.1 MPa. |
| Painting | Inner surface: Rust preventive oil Outer surface: Silver |
| Material body | FCWe also manufacture the main body material made of FCD (product code: KT1D-M, KT1A-M). |
| Material net | SUS |
| Material lid | FCWe also manufacture the main body material made of FCD (product code: KT1D-M, KT1A-M). |
- At the time of initial water flow, air may stay in the main body and cause air damage. When installing on the pump suction side, etc., bleed air. We also manufacture a cover with a plug for bleeding air or a cock, so please contact us.
- We also manufacture options (clogging detector (for indoor use only), magnetic adsorber, internal inspection window). Please refer to page 311 of the catalog.
- Please use KT-4P type (see page 308 of the catalog) for water supply facilities.
- For nominal diameters of 350 or more, use KT-2, 2D type (see page 306 of the catalog).
Download materials
Frequently Asked Questions and Explanations
Is it possible to modify it to a dabit type on site?
It can be modified if the main body has a bearing hole for dabit (changed from 2005).
How do you select the strainer mesh?
Originally, it is selected according to the fluid, application, etc. If the mesh is fine, clogging will occur frequently, and if it is coarse, foreign matter will pass through and foreign matter will enter the product, causing malfunction or damage to the equipment.
Is there anything that can be used for vertical piping?
Basically, it can be installed on vertical piping, but please install it so that the flow direction is from top to bottom. (KU and KW types should be used on horizontal piping.)
What are the differences between KY (Y type), KU (U type), and KT (straight type) strainers? (There is a video in the answer details)
Please watch the video of the answer details.
Inquiries about this product
Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.
We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.
List of related products
Please cooperate with the questionnaire
We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.
Was this page helpful?
How easy was it to find the page you were looking for on this site?
How was the page easy to understand about this site?
Thank you for your cooperation
Added to comparison table View comparison table
Added to Favorites View Favorites
Added to Download BOX Download BOX
