Strainer KT-2D type strainer
Problems such as conventional strainer construction, maintainability, and pressure loss can be solved.
The KT-2 type is a large diameter type of the KT-1 type.
The KT-2D type is a knot type that makes it easy to lift the top lid.
specification
| Product code | KT2D-N |
|---|---|
| Valve type | Straight type |
| type | David formula |
| Nominal diameter | 350-500 (14-20) |
| Applicable fluid | Water / hot waterWe also manufacture steam and gas (fluid temperature 220 ° C or less). |
| Fluid temperature | 5-60 ℃We also manufacture steam and gas (fluid temperature 220 ° C or less). |
| Applicable pressure | 1.0MPa or lessPlease contact us for applicable pressure of 2.0MPa or less. |
| End connection | JIS 10K FF flangeWe also manufacture JIS 5K FF / RF and ASME / JPI class 150 flanges. |
| Mesh | 20, 40, 60, 80, 100 meshAs for the mesh, we also manufacture only punched holes (punched boards) without mesh lining. |
| Tolerant differential pressure | 0.1MPa or lessIf the differential pressure exceeds 0.1MPa, the net may be damaged. Clean the net so that it does not exceed 0.1 MPa. |
| Painting | Body / lid: Epoxy resin coating for internal water supply |
| Material body | SGP or STPYWe also manufacture the main body made of SUS. |
| Material net | SUS |
| Material lid | SGP or STPYWe also manufacture the main body made of SUS. |
- At the time of initial water flow, air may stay in the main body and cause air damage. When installing on the pump suction side, etc., bleed air. We also manufacture a cover with a plug for bleeding air or a cock, so please contact us.
- Please contact us for nominal diameters of 550 to 600.
Download materials
Frequently Asked Questions and Explanations
Is it possible to convert to a davit type on-site? (KT-1 type 250/300A)
Current products can be modified. (Models made before 2005 that do not have davit bearing holes in the main body cannot be modified.)
How do you select the strainer mesh?
Originally, it is selected according to the fluid, application, etc. If the mesh is fine, clogging will occur frequently, and if it is coarse, foreign matter will pass through and foreign matter will enter the product, causing malfunction or damage to the equipment.
Is there anything that can be used for vertical piping?
Basically, it can be installed on vertical piping, but please install it so that the flow direction is from top to bottom. (KU and KW types should be used on horizontal piping.)
What are the differences between strainer types? (Y-shaped, U-shaped, and straight strainers) (Answer details include a video)
Please watch the video of the answer details.
Inquiries about this product
Please use this form for product questions and technical inquiries.
If you would like to contact us by phone, please contact VENN's sales office.
We will strictly manage the personal information of our customers based on our "Personal Information Protection Management Regulations" and will not use it for anything other than responding to inquiries and consultations without the consent of the customer.
Please check our privacy policy.
List of related products
Please cooperate with the questionnaire
We will use your opinions as a reference to make the website easier to understand and useful, so we ask for your cooperation.
Was this page helpful?
How easy was it to find the page you were looking for on this site?
How was the page easy to understand about this site?
Thank you for your cooperation
Added to comparison table View comparison table
Added to Favorites View Favorites
Added to Download BOX Download BOX
