new product

Applicable pressure is 1.0MPa. Unitization helps to save labor. Cartridge system allows easy replacement of main parts.

RHU-1 type

Applicable pressure is 1.0MPa. Unitization helps to save labor. Cartridge system allows easy replacement of main parts.

specification

Product code RHU1-FH□○
Nominal diameter 20 (3/4)
Material body CAC406

Major features

Unitization helps reduce the labor required to install pressure reducing valves for each household.
The rubber parts are made of FKM.
Reliable operation from low to high differential pressure.
Water pressure testing can be performed with the pressure reducing valve installed.

Water Supply Law Performance Standard Certification Registered Product (E-157) Pressure Pressure Performance Leaching Performance Durability Performance

Water Supply Act performance standard certified product (F-113) Pressure resistance, seepage resistance , backflow prevention, durability

Applicable pressure 2.0MPa, stainless steel pilot pressure reducing valve (for water and liquids)

wvr-07

Applicable pressure 2.0MPa, stainless steel pilot pressure reducing valve (for water and liquids)

specification

Product code WVR07-D□
Nominal diameter 80-150 (3-6)
Material body---

Major features

Stable operation can be easily achieved by adjusting the sensitivity by changing the needle valve opening according to the operating conditions.
The basic valve section and pilot valve section can be easily disassembled, facilitating adjustment, repair, and part replacement.
The lift limiting mechanism limits excess flow.

Applicable pressure 1.6MPa, stainless steel pilot operated primary pressure regulating valve (for water and liquids)

WVM-07 type

Applicable pressure 1.6MPa, stainless steel pilot operated primary pressure regulating valve (for water and liquids)

specification

Product code WVM07-D□
Nominal diameter 80-150 (3-6)
Material body---

Major features

Stable operation can be easily achieved by adjusting the sensitivity by changing the needle valve opening according to the operating conditions.
The basic valve section and pilot valve section can be easily disassembled, facilitating maintenance such as adjustment, repair, and part replacement.
The lift limiting mechanism limits excess flow.

Applicable pressure 1.6MPa, main body and main parts made of stainless steel for long life.

AD-22 type

Applicable pressure 1.6MPa, main body and main parts made of stainless steel for long life.

specification

Product code AD22-D
Nominal diameter 15-25 (1/2-1)
Material body SCS

Major features

Both the main body and main parts are made of stainless steel.
Can be mounted horizontally, vertically (downward exit), or horizontally. (Excluding top lid facing downwards)
It has a wide applicable pressure range and can be used in a wide range of applications.

Applicable pressure 1.6MPa, main body and main parts made of stainless steel for long life.

0410: AD-22F type

Applicable pressure 1.6MPa, main body and main parts made of stainless steel for long life.

specification

Product code AD22F-D
Nominal diameter 15-25 (1/2-1)
Material body SCS

Major features

Both the main body and main parts are made of stainless steel.
Can be mounted horizontally, vertically (downward exit), or horizontally. (Excluding top lid facing downwards)
It has a wide applicable pressure range and can be used in a wide range of applications.

This is a direct-acting pressure reducing valve for water and liquids that supports primary pressures up to 2.0 MPa.

RD-55 type

This is a direct-acting pressure reducing valve for water and liquids that supports primary pressures up to 2.0 MPa.

specification

Product code RD55-DD
Nominal diameter 50-100 (2-4)
Material body SCS

Major features

Can be used up to 2.0MPa on the primary side.
Low noise compared to conventional high pressure products.

Straight type strainer that supports 2.0 MPa and complies with the performance standards of the Waterworks Act.

KT-8PN type

Straight type strainer that supports 2.0 MPa and complies with the performance standards of the Waterworks Act.

specification

Product code KT8PN-M
Nominal diameter 40-100 (1 1/2-4)
Material body FCD

Major features

Easy to disassemble and clean with the unique stopper of the new structure.
A 2.0 MPa compatible product that meets the performance standards of the Waterworks Act.

Water Supply Law Performance Standard Certification Registered Product (Z-231) Pressure Pressure Performance Leaching Performance

Straight type strainer that supports 2.0 MPa and complies with the performance standards of the Waterworks Act.

KT-8CN type

Straight type strainer that supports 2.0 MPa and complies with the performance standards of the Waterworks Act.

specification

Product code KT8CN-M
Nominal diameter 40-100 (1 1/2-4)
Material body FCD

Major features

Easy to disassemble and clean with the unique stopper of the new structure.
A 2.0 MPa compatible product that meets the performance standards of the Waterworks Act.

Waterworks Law Performance Standards Certification Registered Product (Z-56) Pressure resistance performance Leaching performance

A direct mixing valve that connects steam and water to quickly supply hot water.

TR-5 type

A direct mixing valve that connects steam and water to quickly supply hot water.

specification

Product code TR5-J
Nominal diameter 20 (3/4)
Material body CAC nickel plating

Major features

Lightweight and compact design that is easy to install.
It is a direct mixing type that can quickly supply hot water.
By adopting a pre-stop type, it is possible to open and close at hand.
It is a safety design in which steam is supplied after the water side flows.

Precise pressure control even at large flow rates. Made in Japan.

RP-70 type

Precise pressure control even at large flow rates. Made in Japan.

specification

Product code RP70-L □
Nominal diameter 15-100 (1/2-4)
Material body FCD

Major features

The diaphragm type provides stable control even in high flow rate applications.
It operates stably due to its unique patent-pending structure.
It can be used for a wider pressure range and flow rate range.
The external inspection type filter makes it easy to inspect the filter.
Made in high quality pure Japan.

Search tips

Products with different symbols depending on the product specifications are indicated by □.
When searching, please search by inputting up to the first character after the "-" (hyphen).

Notation on catalogs and websites

RD44N-F □

Contains characters that indicate pressure classification and options.

No hits in product search
RP7-FL
Hit in product search
RP7-FL
You can also search by product name or model.
product name
"Reducing valve", "solenoid valve", "safety valve", etc.
Model
"RP-6", "RD-31N", "SL-37", etc.